Termékek kávézó berendezési elemek (99)

Vi driver med framställning av stålkomponenter och specialiserar oss på serieproduktion. Vi gör vårt bästa för att varje element är av hög kvalitet och detaljer i hela serien blir lika bra. Prefabricerade varor tillverkas på vår egen fabrik. Vi producerar: - byggelementer (gjerder, rekkverk, trapper, porter, bindingsverk) - Liten arkitektur (benker, stativer) - elementer och utredning för hoppa över - maskinelementer - små och medelstora lager stålkonstruktioner (skurer, ja, hyller, bindingsverk, tankfartyg) - seriebestillinger - olika dimensioner - egen materiallager - kort leveringsfrister

The DSQWA rectangular multiblade aluminium dampers can be used to control and isolate air flow in rectangular ductwork. The dampers can be installed in ventilation ducts, as wallmounted air flow regulators, or AHU air flow regulating and shutoff units. All dampers have a housing made of 4 aluminium profiles and a closure consisting of aluminium blades. The blade height is the same for all product sizes. The blades are fitted with gaskets to provide air tightness class 2 as per EN 17512003. The DSQWA damper can have a handoperated damper mechanism QDMPSAL, an externallymounted actuator, or an actuator mounting. The damper mechanism is installed on the outer surface of the housing. The damper blade rotation mechanism features short and long shafts rotating by intermeshed gears installed on bearings. The gears are installed on the outer surface of the housing.

The IPR access door features a CR EPDM gasket and it is designed for installation on round duct walls. The design of the IPR access door and its gasket profile provide a perfect seal around the duct opening. This ensures a high air tightness class. The product provides a very simple, lowcost and extremely effective solution for closing and sealing access openings in the ductwork. The openings made in the ductwork for access doors must be sized to meet the requirements of EN 12097. Another determinant of the access opening size is how the interior is cleaned. Some cleaning processes and tools require access doors as large as 800x400 mm. The access door is installed in the opening made using the cutting template supplied with the product.

turning steel producing components

Round spiral ducts are available in diameters from 80 mm to 1600 mm. The ducts are available as made of 0.4 mm to 1.8 mm thick metal sheet; the ducts in diameters of DN 160 mm or greater are also available with corrugation for improved stiffness and vacuum strength. The corrugations are available as a standard feature for diameters of DN 250 mm to DN 1600 mm. All spiral ducts made from galvanized steel sheet, stainless steel sheet or aluminium sheet meet requirements of air tightness class D according to EN 12237. material:galvanized steel sheet diameters:80-1600mm airtightness:class D sheet thickness:0.4 to 1.8 mm

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630.

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

Nous fabriquons des composants en acier. Nous nous spécialisons dans la production de masse. Nous faisons tout notre possible pour que chaque élément fabriqué soit de haute qualité et que les détails de la série entière soient parfaitement reproduits. Nous traitons la préfabrication dans notre propre usine de production.

The main pillar of our activity is SMD surface mounting and THT through-hole mounting in compliance with applicable ESD safety standards on high-end equipment

Our conventional and CNC milling and machining services can be utilized for producing wooden components according to customer's design and requirements.

The main pillar of our activity is SMD surface mounting and THT through-hole mounting in compliance with applicable ESD safety standards on high-end equipment

HRUWALL is a singleroom decentralized heat recovery unit for concealed installation. The unit comes with a ceramic heat exchanger which boasts a maximum heat recovery ratio of 90% (the nominal heat recovery ratio is η=74.3% as per EN 1314182011). The energyefficient EC fan changes the running direction every 70 seconds to alternate between air supply and air exhaust. Low energy consumption and extremely low operating noise make this heat recovery unit a recommended solution for nonstop operation. The heat recovery unit has three speed levels to choose from, depending on the size of the area and indoor demands. HRUWALL10025 provides a sufficient air change level in areas up to 19m2. HRUWALL15060 provides a sufficient air change level in areas up to 45m2. We recommend installing the devices in pairs.

Wir führen umfassend Aufträge für die Offshore- und Onshore-Industrie aus. Unser Portfolio umfasst Projektimplementierungen unter anderem für führende norwegische Anbieter von Offshore-Projekten und -Lösungen auf der ganzen Welt.

Round spiral ducts are available in diameters from 80 mm to 1600 mm. The ducts are available as made of 0.4 mm to 1.8 mm thick metal sheet; the ducts in diameters of DN 160 mm or greater are also available with corrugation for improved stiffness and vacuum strength. The corrugations are available as a standard feature for diameters of DN 250 mm to DN 1600 mm. All spiral ducts made from galvanized steel sheet, stainless steel sheet or aluminium sheet meet requirements of air tightness class D according to EN 12237.

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.

Εξαρτήματα συμπίεσης επισκευής από χυτοσίδηρο

A femalemale coupling made of expanded polypropylene (EPP) is used to connect the EPP15 ducts, when the male part is cut off (e.g. when duct is shortened). The female coupling fits the outer diameter of the 15 mm duct. The couplings are produced in 125, 160 and 200 mm sizes. Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @ 90 Pa acc. to PNEN 17192201901

We have a modern machine park that allows us to professionally complete orders and work safely, quickly and efficiently. Production takes place while maintaining all aspects of ESD protection.

Round ventilation duct made of expanded polypropylene (EPP). The most important features of the product are rigid construction, low weight, easy assembly and good thermal insulation. EPP ducts, used, for example, as sections of the supply and exhaust ventilation systems with heat recovery, do not require additional insulation. The system eliminates the formation of thermal bridges. Ducts na fittings do not require additional couplings. Lenght EPP ducts 1 m sections Diameters 125, 160 and 200 mm. Wall thickness 43 mm Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @110Pa acc. to PNEN 17192201901

HHS wall diffuser for fresh air supply. Male connector with gasket for fast connection with SPIRAL® duct. Powder painted with white RAL 9010 colour which provides additional protection from corrosion in places with high humidity, such as bathrooms. An excellent choice when celling mounting is out of the scope or the interior design requires a wall diffuser. It can be used in offices, residential houses and mounted just under the ceiling as well.

Wij produceren stalen componenten. Wij zijn gespecialiseerd in massaproductie. We doen er alles aan om ervoor te zorgen dat elk van de geproduceerde elementen van hoge kwaliteit is en dat de details in de hele serie perfect zijn gereproduceerd. Wij behandelen prefabricage in onze eigen productiefabriek.

Heat recovery ventilation unit HRUPremAIR is a modern device with 350 / 450 or 500 m3/h air flow @ 100 Pa. Unit is made from cutting edge materials aluminim heat exchanger and EPP selfsupporting casing. Depending on the model, following heat exchangers are used counterflow aluminium heat exchanger (HRV) or counterflow enthalpy exchanger (ERV). Enthalpy exchangers in HRUPremAIRE series have a polymer membrane that effectively recovers heat and moisture from the extract air. Such membrane works like a membrane in waterproof trekking clothing i.e. it allows water vapour to pass through, but not liquid water and air. The enthalpy exchanger also blocks the transfer of odours, bacteria and spores. The exchanger material, is needless to say, primarily optimized for maximum heat recovery efficiency. PremAIR air handling units optionally can be equipped with the Constant Flow system, whose task is to maintain a constant air flow in the installation.

Posiadamy wieloletnie doświadczenie w produkcji wysokiej jakości kutych metalowych konstrukcji dla branży meblowej, m.in. ram i nóg stołów. Gwarantujemy rozsądne ceny i terminowość w realizacji zleceń.

longitudinal welding with overlap pipe for transporting air and dust. TRANSQuick system is made of galvanised steel sheet, 0.7 and 0.9 mm in thickness. Depending on the wall thickness there are available various lengths 0.7 mm thickness L=500 / 1000 / 1480 mm. 0.9 mm thickness L=500 / 1000 mm

We comprehensively carry out orders for the offshore and onshore industry. Our portfolio includes project implementations for, among others, leading Norwegian suppliers of offshore projects and solutions around the world.

Final assembly We perform complex tasks that require specialist skills, precision and accuracy in action to deliver the highest quality product in its final stage

The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.

We have a modern machine park that allows us to professionally complete orders and work safely, quickly and efficiently. Production takes place while maintaining all aspects of ESD protection.

Vi fremstiller stålkomponenter. Vi er specialister i masseproduktion. Vi gør alt for at sikre, at hver af de fremstillede elementer har en høj kvalitet, og detaljerne i hele serien blev perfekt gengivet. Vi beskæftiger os med præfabrikeringen i vores eget produktionsanlæg.